|
| |
|
|
SWR Meter: CellMate EX |
|
|
 |
The CellMate EX is an antenna analyzer that operates in the cellular frequency range of 600 – 999 MHz. This low cost analyzer provides graphical plots of SWR and Return Loss, numerical results, and plot storage. |
AEA's CellMate EX Analyzer is a graphical 600 - 999 MHz antenna analyzer that is primarily used to graph and examine antenna VSWR and Return Loss plots. The CellMate EX includes Signal Generator and Relative Field Strength modes, multi-layer menus, auto scaling and auditory cues for extremely flexible operability. As a low priced, accurate, and graphical analyzer, The CellMate EX provides data plots in a fraction of the time and cost it takes to do it manually. At twenty ounces, the CellMate EX Analyzer is light weight and easily hand held. With the Analyst Director Software to interface with your PC, you have endless curve storage and printout capability. |
|
| FEATURES |
 |
Storage for 15 plots. |
|
Simultanious multiple plot viewing in memory mode. |
|
Signal generator mode. |
|
Self Test and calbration functions |
|
Return Loss and VSWR modes. |
|
Remote control capability. |
|
Relative Field strength mode |
|
Optional Windows™ Analyst Director Software |
|
Non-volatile memory |
|
High resolution plot display on PC. |
|
EL Backlit SuperTwist display for better contrast and viewing angles. |
|
Compatible with NiMH and NiCd batteries. |
|
Battery Saver auto-off and auto-hold functions |
|
Auto Scaling. |
|
Auditory cues. |
|
| SPECIFICATION |
|
| Range: |
600 - 999 MHz |
| Display Resolutions: |
Increments of 10 KHz |
| Measurement speed: |
Single frequency: Several sweeps per second / Normal sweep: < 2 seconds |
| Frequency display width: |
0 to 200 Mhz |
| Impedance Range: |
50 Ohms |
| Harmonic and spurious: |
>40 dB below fundamental |
| Output power: |
>+5 dBm@ 50 ohms |
| Serial interface speeds: |
9600, 19200 & 38400 BPS |
| Power requirements: |
12-16 VDC @ 300 ma minimum or 8 AA's (Alkaline or NiMH) |
| Antenna connector: |
Industry standard `N` connector |
| Size: |
8.5 inch x 4.3 inch x 2.25 inch |
| Weight: |
20 oz. |
| Memory: |
Store 15 plots |
| Display: |
SuperTwist LCD with backlight |
| Communications: |
Serial Port |
| Internal Power: |
8 AA Alkaline, NiMH or NiCd batteries (optional) |
| External Power: |
90-240 VAC, 50-60Hz wall adapter (optional) |
|
| BENEFITS |
|
Lightweight, portable, and battery power capability. |
|
Ability to archive and print plots for documentation. |
|
Simplicity of tuning and checking antennas. |
|
| INCLUDES |
|
Adapter, N-to-TNC: 0070-1134 |
|
| Application |
| Cable Testing – Coax, twisted pair, or single wires bundled |
|
|
| PRODUCT OPTIONS |
|
Soft Carrying Case: 6015-1002 |
|
Hard Carrying Case: 6015-1003 |
|
DC Vehicle Adapter: 6025-0250 |
|
DC Extender Cable, 20 ft (6m): 0070-1200 |
|
Certificate of Calibration: 6000-0410 |
|
Analyzer Kit, includes: Unit, Analyst Director Software, Serial Cable, Belt Case & Ac Adapter |
|
Adapters, N-to-SMA & Calibration Kit: 6025-0260 |
|
Adapter, N-to-SO-239: 0070-1195 |
|
Adapter, N-to-BNC: 0070-1190 |
|
|
|
|
|
|
|
|
