The Echo is a hand-held Vector Impedance Analyzer (Vector Network Analyzer), Spectrum Analyzer, Power Meter, and Frequency Domain Reflectometer (FDR) in one instrument. Echo models come in frequency ranges of 4MHz-to-1.0GHz or 4MHz-to-2.5GHz. The VIA Echo Network Analyzer was designed for performing antenna testing and tuning, transmission line testing and fault locating, cellular site turn-up testing and troubleshooting. It can be used for individual component testing, system or network testing. In a production environment Echo can be used to verify components and assemblies the same as equivalent Agilent (old HP) Network Analyzers at a fraction of the cost.

The VIA Analyzer is an impedance analyzer for the HF band. The VIA has a frequency range of 100 kHz to 54 MHz. Features include graphical representations of SWR, Return Loss, Impedance, and Resistance.

AEA’s 140-525 Analyzer operates in the UHF/VHF band, and has a frequency range of 135 -525 MHz. The 140-525 provides graphical plots of VSWR and Return Loss, numerical results, and plot storage.

The CellMate EX is an antenna analyzer that operates in the cellular frequency range of 600 – 999 MHz. This low cost analyzer provides graphical plots of SWR and Return Loss, numerical results, and plot storage.

The 20/20 Step Time Domain Reflectometer (TDR) was designed to provide the clearest picture of coaxial or twisted pair cable lengths and to pin-point cable faults.   Step TDR’s, unlike Pulse TDR’s, have no dead-zone on any range and they can provide an impedance (Z) reading for the cable, both graphically and digitally. 

The VIA Bravo product line is a family of general purpose vector impedance analyzers used to measure impedance and resonant frequencies of circuits and antennas from 100 kHz to 200 MHz. VIA Bravo analyzers are available in both single port (S11) and dual port (S11/S21) versions. Applications include Commercial Radio, Aviation, and Radio Frequency Identification (RFID).