SWR Meter - 140-525 - AEA Technology Inc.

Home

Products

Sales

Literature & Software

SWR Meter: 140-525

View Datasheet

Product Accessories

AEA’s 140-525 Analyzer operates in the UHF/VHF band, and has a frequency range of 135 -525 MHz. The 140-525 provides graphical plots of VSWR and Return Loss, numerical results, and plot storage.

AEA Technology's 140-525 Analyzer is a graphical antenna analyzer covering 135 to 525 MHz that speeds visualization of VSWR and Return Loss plots. The onscreen plot allows you to quickly determine the best match frequency and the 2:1 bandwidth points. 140-525 has 15 memories for plot storage and a relative Field Strength meter to determine if there is excessive RF in the testing area.

At 20 ounces, the 140-525 Analyzer is light weight and easily hand held. With the Analyst Director Software (Windows 95/98/2000/ME/XP compatible) to interface with your PC, you have endless curve storage and printout capability.

The 140-525 and its software is a powerful, yet cost effective, VHF/UHF testing tool set that should be in every Engineer/Technicians tool box.

FEATURES
	Simultanious multiple plot viewing in memory mode.
	SuperTwist display for better contrast and viewing angles.
	Storage for 15 plots.
	Signal generator mode.
	Self Test and calbration functions
	Return Loss and VSWR modes.
	Relative Field strength measurements.
	Optional Windows™ Analyst Director Software
	Plot transfer between PC and 140-525.
	Non-volatile memory
	Compatible with NiMH and NiCd batteries.
	Battery Saver auto-off and auto-hold functions
	Auto Scaling.
	Auditory cues.

SPECIFICATION
Range:	135 to 525 MHz
Display Resolutions:	increments of 10 KHz
Measurement speed:	Single frequency: Several sweeps per second / Normal sweep: < 2 seconds
Frequency display width:	0 to 500 MHz
Impedance Range:	50 Ohms
Harmonic and spurious:	>40 dB below fundamental
Output power:	>+5 dBm@ 50 ohms
Serial interface speeds:	9600 to 19.2K baud
Power requirements:	12 - 16 VDC @ <250 ma or 8 AA batteries (Alkaline or NiMH)
Antenna connector:	Industry standard `N` connector
Size:	8.5 inch x 4.3 inch x 2.25 inch
Weight:	20 oz.
Memory:	Store 15 plots
Display:	0 to 500 MHz
Communications:	Serial Port
Internal Power:	8 AA Alkaline, NiMH or NiCd batteries (optional)
External Power:	90-240 VAC, 50-60Hz wall adapter optional

BENEFITS
	High accuracy when checking or tuning antennas.
	Ability to archive and print plots for documentation.
	Lightweight, portable, and battery power capability.

INCLUDES
	Adapter N-to-SO-239: 0070-1195

PRODUCT OPTIONS
	Value Bundle Special (Analyst Director): 5006-1500
	Hard Carrying Case: 6015-1003
	NiMH Batteries (8 AA) & Charger Kit: 0010-0020
	Soft Carrying Case: 6015-1002
	DC Vehicle Adapter: 5001-0250
	Certificate of Calibration: 6000-0402
	DC Extender Cable, 20 ft (6m): 0070-1200
	Adapters, N-to-SMA & Calibration Kit: 6025-0260
	Adapter, N-to-TNC: 0070-1134
	Adapter, N-to-BNC: 0070-1190

	Antenna Testing
	Antenna Isolation Testing
	Cable Fault Locating
	Cable Impedance Testing
	Cable Measuring
	Circuit Analysis
	Circuit Gain/Loss
	MRI Coil Testing
	Network Analysis
	Power Meter Reading
	Spectrum Analysis
	Vector Impedance Analysis
	NMR Coil Testing/Tuning

	Amateur
	Aviation
	CATV/Broadband
	Government
	Laboratory
	Military
	MRI or NMR Coil Testing
	Railroad
	RFID
	Telco
	Wireless (Broadcast)
	Wireless (Land Mobile)

Access and use of this site is subject to the terms and conditions of our PRIVACY POLICY
Property of and Proprietary to AEA Technology, Inc.
Copyright © 2001-2008 AEA Technology, Inc.
ALL RIGHTS RESERVED